Parviz Asadi (Faculty Member)

Journal Paper

1. "(Alumina and graphene)/ PLA nanocomposites manufactured by digital light processing 3D printer"
   Hossein Maleki, Parviz Asadi, Arman Sedghi, Naghdali Choupani, , Mamdouh I. Elamy
   Journal of Materials Research and Technology-JMR and T, Vol. 32, pp.3120-3134, 2024
2. "Fracture toughness determination for epoxy-based polymer concrete mixtures: applicability of different rectangular beam and circular disc specimens"
   M.R.M. Aliha, H.G. Kouchaki, M.H. Mohammadi, P.J. Haghighatpour, N. Choupani, Parviz Asadi, M. Akbari, M.G. Darvish, T. Sadowski
   Composites Part C: Open Access, Vol. 14, pp.1-13, 2024
3. "Examining the impact of tool taper angle in Al-Si tube manufacturing by friction stir extrusion"
   Parviz Asadi, Mostafa Akbari, Tomasz Sadowski, Yaghuob Dadgar Asl, Naghdali Choupani, Fevzi Bedir
   Journal of Manufacturing Processes, Vol. 131, pp.532-544, 2024
4. "Modeling and optimization of process parameters of the piston alloy-based composite produced by FSP using response surface methodology"
   Mostafa Akbari, Parviz Asadi, MohammadReza Mohammad Aliha, Filippo Berto
   SURFACE REVIEW AND LETTERS, Vol. 30, pp.1-15, 2023
5. "A Review on Friction Stir Welding/Processing: Numerical Modeling"
   Mostafa Akbari, Parviz Asadi, Tomasz Sadowski
   Materials, Vol. 16, pp.1-73, 2023
6. "Recycling of brass chips by sustainable friction stir extrusion"
   Parviz Asadi, Mostafa Akbari, Amir Armani, M.R.M. Aliha, , Tomasz Sadowski
   JOURNAL OF CLEANER PRODUCTION, Vol. 418, pp.1-12, 2023
7. "Selection of Optimal Tool Geometry for the Production of Brass Wires Using the FSBE Method"
   M Akbari, Parviz Asadi, H Rahimi Asiabaraki
   Journal of Solid Mechanics, Vol. 15, pp.66-77, 2023
8. "Production of LM28 Tubes by Mechanical Alloying and Using Friction Stir Extrusion"
   Parviz Asadi, Mostafa Akbari, Mahyar Talebi, , Tomasz Sadowski, Mohammad Reza Mohammad Aliha
   Crystals, Vol. 13, 2023
9. "Friction stir extrusion and mechanical alloying of LM13 casting ingot to produce LM28 tubes"
   Mahyar Talebi, Parviz Asadi, Mostafa Akbari
   Journal of Materials Research and Technology-JMR and T, Vol. 27, pp.6672-6687, 2023
10. "Characterization of the Influence of Rotational and Traverse Speeds on the Mechanical and Microstructural Properties of Wires Produced By the FSBE Method"
    Parviz Asadi, Mostafa Akbari, Omid Kohantorabi, , M. R. M. Aliha, S. M. Salehi, H. R. Asiabaraki, Filippo Berto
    STRENGTH OF MATERIALS, Vol. 54, pp.318-330, 2022
11. "Multivariate optimization of mechanical and microstructural properties of welded joints by FSW method"
    Parviz Asadi, M.R.M. Aliha, Mostafa Akbari, D.M. Imani, Filippo Berto
    ENGINEERING FAILURE ANALYSIS, Vol. 140, pp.1-11, 2022
12. "INVESTIGATION OF WEAR AND MICROSTRUCTURAL PROPERTIES OF A356/ TiC COMPOSITES FABRICATED BY FSP"
    MOSTAFA AKBARI, Parviz Asadi, HOSSEIN RAHIMI ASIABARAKI
    SURFACE REVIEW AND LETTERS, Vol. 29, pp.1-10, 2022
13. "Modeling of pin shape effects in bobbin tool FSW"
    Parviz Asadi, Mohammad hosein Mirzaei, Mostafa Akbari
    International Journal of Lightweight Materials and Manufacture, Vol. 5, pp.162-177, 2022
14. "Effects of different cooling conditions on friction stir processing of A356 alloy: Numerical modeling and experiment"
    Mostafa Akbari, Parviz Asadi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 236, pp.4133-4146, 2022
15. "Investigation of the effect of tool probe profile on reinforced particles distribution using experimental and CEL approaches"
    Mostafa Akbari, Morteza Ezzati, Parviz Asadi
    International Journal of Lightweight Materials and Manufacture, Vol. 5, pp.213-223, 2022
16. "Optimization of microstructural and mechanical properties of brass wire produced by friction stir extrusion using Taguchi method"
    Mostafa Akbari, Parviz Asadi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 12, pp.2709-2719, 2021
17. "Improving the Hardness and Microstructural Properties of Piston Alloy Using the FSP Method"
    Mostafa Akbari, Parviz Asadi, Hossein Rahimi Asiabaraki
    Journal of Modern Processes in Manufacturing and Production, Vol. 10, pp.53-62, 2021
18. "Formability study and metallurgical properties analysis of FSWed AA 6061 blank by the SPIF process"
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    SN Applied Sciences, Vol. 3, pp.1-23, 2021
19. "Effect of Tool Pin Shape on Defect-Free FSP and Particles Distribution in SiC/Al6061 Composites"
    Morteza Ezzati, Parviz Asadi, Mostafa Akbari
    Journal of Advanced Materials and Processing, Vol. 9, pp.49-62, 2021
20. "Numerical modeling and experimental investigation of brass wire forming by friction stir back extrusion"
    Parviz Asadi, Mostafa Akbari
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 119, pp.1-15, 2021
21. "Material flow modeling for the DSFSW of magnesium alloy"
    Parviz Asadi, Mohammad hosein Mirzaei
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol. 56, pp.275-290, 2021
22. "A Hybrid Method of NSGA-II and TOPSIS to Optimize the Performance of Friction Stir Extrusion"
    Mostafa Akbari, Parviz Asadi, Hossein Rahimi Asiabaraki
    Iranian Journal of Materials Forming, Vol. 8, pp.46-62, 2021
23. "Numerical investigation on the effect of welding speed and heat input on the residual stress of multi-pass TIG welded stainless steel pipe"
    Parviz Asadi, Samaneh Alimohammaditatar, Omid Kohantorabi, Ali Soleymani, Ali Fazli
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 235, pp.1007-1021, 2021
24. "Modeling of material flow in dissimilar friction stir lap welding of aluminum and brass using coupled Eulerian and Lagrangian method"
    Mostafa Akbari, Parviz Asadi, Reza Abdi Behnagh
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 113, pp.721-734, 2021
25. "Simulation and experimental investigation of multi-walled carbon nanotubes/aluminum composite fabrication using friction stir processing"
    Mostafa Akbari, Parviz Asadi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. 235, pp.2165-2179, 2021
26. "Effects of material type, preheating and weld pass number on residual stress of welded steel pipes by multi-pass TIG welding (C-Mn, SUS304, SUS316)"
    Parviz Asadi, Samaneh Alimohammaditatar, Omid Kohantorabi, Ali Fazli, Mostafa Akbari
    Thermal Science and Engineering Progress, Vol. 16, pp.1-12, 2020
27. "Effect of Tool Pin Profile on Material Flow in Double Shoulder Friction Stir Welding of AZ91 Magnesium Alloy"
    Mohammad hosein Mirzaei, Parviz Asadi, Ali Fazli
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 183, 2020
28. "Dissimilar friction stir lap welding of aluminum to brass: Modeling of material mixing using coupled Eulerian-Lagrangian method with experimental verifications"
    Mostafa Akbari, Parviz Asadi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 234, pp.1117-1128, 2020
29. "Formation of thermo-mechanically affected zone in friction stir welding"
    Parisa Zolghadr, Mostafa Akbari, Parviz Asadi
    Materials Research Express, Vol. 6, 2019
30. "Formability analysis of dissimilar friction stir welded AA 6061 and AA 5083 blanks by SPIF process"
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    CIRP Journal of Manufacturing Science and Technology, Vol. 25, pp.50-68, 2019
31. "Optimization of microstructural and mechanical properties of friction stir welded A356 pipes using Taguchi method"
    Mostafa Akbari, Parviz Asadi
    Materials Research Express, Vol. 6, 2019
32. "Wear and mechanical properties of surface hybrid metal matrix composites on AlSi aluminum alloys fabricated by friction stir processing"
    Mostafa Akbari, Mohammad Hasan Shojaeefard, Parviz Asadi, Abolfazl Khalkhali
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 2, pp.1464420717-1464420726, 2017
33. "Wear Performance of A356 Matrix Composites Reinforced with Different Types of Reinforcing Particles"
    Mostafa Akbari, Mohammad Hasan Shojaeefard, Parviz Asadi, Abolfazl Khalkhali
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 3, pp.1-14, 2017
34. "Hybrid multi-objective optimization of microstructural and mechanical properties of B 4 C/A356 composites fabricated by FSP using TOPSIS and modified NSGA-II"
    Mostafa AKBARI, Mohammad Hasan SHOJAEEFARD, Parviz Asadi, Abolfazl KHALKHALI
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 27, pp.2317-2333, 2017
35. "The effect of reinforcement type on the microstructure mechanical properties and wear resistance of A356 matrix composites produced by FSP"
    Mohammad Hasan Shojaeefard, Mostafa Akbari, Parviz Asadi, Abolfazl Khalkhali
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 91, pp.1391-1407, 2017
36. "Multicriteria optimization of mechanical properties of aluminum composites reinforced with different reinforcing particles type"
    Mostafa Akbari, Parviz Asadi, Parisa Zolghadr, Abolfazl Khalkhali
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. 1, pp.954408917-954408931, 2017
37. "Arrangement of gas fuel nozzle in power plant turbines with the purpose of temperature spread control and based on gas fuel flow rate"
    Parviz Asadi, Ali Fazli, Hossein Jafar zadeh, Hossein Maleki
    Vol. 10, pp.39-48, 2024
38. "Effect of weight percentage of alumina on mechanical properties of nanocomposite produced by additive manufacturing method of digital light processing"
    Hossein Maleki, Parviz Asadi, Zahra Karimi, Arman Sedghi
    Vol. 5, pp.57-67, 2023
39. ""
    حسين رحيمي, مصطفي اكبري, Parviz Asadi
    Vol. 9, pp.52-59, 2022
40. "Experimental Investigation of Welding Defects in Butt Joining of Aluminum Alloy by Friction Stir Welding: Effects of Tool Pin Profile and Process Parameters"
    مصطفي اكبري, Parviz Asadi
    Vol. 19, pp.125-143, 2022
41. "The effect of the die geometry on the joint strength of Al 3105 aluminum sheets joined by the clinching process"
    Mohammad hosein Mirzaei, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    Vol. 7, pp.10-23, 2021
42. "Experimental investigation of the joinability of three-layer aluminum/ polymer/ aluminum composite sheets by the clinching process"
    Rasoul Naderli, Ali Fazli, Mahdi Soltanpour, Parviz Asadi
    Vol. 8, pp.27-38, 2021
43. ""
    hossein yousefi, Mehdi Dianati, Omid Kohantorabi, Parviz Asadi
    Vol. 29, pp.34-46, 2020
44. ""
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    Vol. 26, pp.22-39, 2018
45. "Experimental and numerical investigation of the formability of friction stir welded 5083 aluminum alloy sheets in single point incremental forming process"
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    Vol. 18, pp.45-55, 2018

Conference Paper

1. "Recycling of Brass Chips by Sustainable Friction Stir Extrusion"
   Parviz Asadi, Mostafa Akbari, Amir Armani
   International Conference on Green Manufacturing and Product Design (ICGMPD - 23), pp.336-351, 2023
2. ""
   Ali Fazli, Parviz Asadi, Hamed Barotiha, Mojtaba Mashayekhi
   , pp.1-6, 2023
3. ""
   Hosein Rahimi Asiabaraki, Parviz Asadi, Mostafa Akbari, Morteza Ezzati
   , 2022
4. ""
   Mostafa Akbari, Parviz Asadi, Hosein Rahimi Asiabaraki
   , 2022
5. ""
   Mohammad Mohebi rad, Parviz Asadi, Mohammad hosein Mirzaei, Mehran Shafiee alavijeh
   , 2019
6. ""
   Mehran Shafiee alavijeh, Parviz Asadi, Mohammad hosein Mirzaei, Mohammad Mohebi rad
   , 2019
7. ""
   Mohammad hosein Mirzaei, Parviz Asadi, Ali Fazli, Mohammad Mehrabadi
   , 2019
8. ""
   Seyyed Masoud Mirbabashahi, Parviz Asadi, Mohammadreza Ebrahimian
   , pp.1-13, 2019
9. ""
   Samaneh Alimohammaditatar, Mahdi Soltanpour, Ali Fazli, Parviz Asadi
   , 2019
10. ""
    Keyvan Soleymanpour, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    , pp.1-6, 2019
11. ""
    Mohsein Ashrafi, Parviz Asadi, Mohammadreza Ebrahimian
    , 2019
12. "Considering the Effect of thresded pin profiles on particle distribution and tensile strength of Al6061/SiC composite produced by FSP"
    Morteza Ezzati, Parviz Asadi
    1st National Conference on Micro/Nanoscale Technologies, 2018
13. "Particle and hardness distribution in Al6061/SiC composite produced by FSP Investigation of edged pin profiles"
    Morteza Ezzati, Parviz Asadi
    1st National Conference on Micro/Nanoscale Technologies, 2018
14. ""
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    , pp.1-9, 2017
15. ""
    Payam Tayebi, Ali Fazli, Parviz Asadi, Fateme Yousefi
    , pp.1-8, 2017