Morteza Saghafiyazdi (Faculty Member)

Journal Paper

1. "Ultrasonic-assisted laser cladding of TiNiCrMoW-ZrB2 high-entropy composite coatings on IN738 superalloy: Microstructure, residual stress, and erosion resistance"
   Hassan Dargi, Reza Tagiabadi, Morteza Saghafiyazdi, Morteza Taheri, R. Vaira Vignesh
   MATERIALS CHEMISTRY AND PHYSICS, Vol. 356, pp.1-19, 2026
2. "Enhancing corrosion resistance of AISI 4130 steel through optimized HVOF tungsten carbide coatings"
   , Mohammad Abedini Mohammadi, Javad Ansari, Parviz Asadi, Mostafa Akbari, Morteza Saghafiyazdi, Sirus Safaee
   Results in Surfaces and Interfaces, Vol. 18, pp.1-9, 2025
3. "Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy"
   Rahim Nemati, Reza Tagiabadi, Morteza Saghafiyazdi, Saied Amini
   Journal of Ultrafine Grained and Nanostructured Materials, Vol. 58, pp.67-77, 2025
4. "Tribology characteristics of ultrasonic impact treated Co-based L-605 superalloy"
   Rahim Nemati, Reza Tagiabadi, Morteza Saghafiyazdi, Saeid Amin
   Iranian Journal of Materials Forming, Vol. 12, pp.37-50, 2025
5. "Improving Bioactivity and Corrosion Resistance of Laser-Powder-Bed-Fused Ti6Al4V with Hydroxyapatite and Titanium Oxide Nanocomposite Coatings Applied by Electrophoretic Deposition"
   H. Sohrabpoor, Vahid Salarvand, Morteza Torabpour, Morteza Saghafiyazdi, Parviz Asadi, D. Brabazon, B. D. Stein, R. Raghavendra
   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 34, pp.20459-20473, 2025
6. "Investigation of tribological behavior for IN625 coating on IN738 superalloy by laser cladding process"
   Amirhossein Aboutorabi sani, Morteza Saghafiyazdi, Mohammad Talafi Noghani, Morteza Taheri,
   Emergent Materials, Vol. 8, pp.887-904, 2025
7. "Investigation of the effect of laser surface treatment on the hot corrosion properties of CSZ/YSZ multilayer TBC coatings"
   Mohammad Gholami Tahouneh, Mostafa Jafarzadgan, Vahid Salarvand, Morteza Taheri, Morteza Saghafiyazdi
   PHYSICA SCRIPTA, Vol. 100, pp.1-19, 2025
8. "Ultrasonic impact treatment of CoCrWNi superalloys for surface properties improvement"
   Rahim Nemati, Reza Tagiabadi, Morteza Saghafiyazdi, Saeid Amini
   Materials Testing, Vol. 67, pp.372-385, 2025
9. "Microstructure Refinement and Property Enhancement of Zn-4Al Biodegradable Alloy via Optimized Friction Stir Processing"
   Zeinab Ahmadi, Reza Tagiabadi, Morteza Saghafiyazdi, Ali Moharami
   MATERIALS SCIENCE AND TECHNOLOGY, Vol. 41, pp.1283-1292, 2025
10. "Developing a facile process for cobalt recycling from zinc plant residues using various environmentally friendly reductants towards a green and sustainable application in water splitting"
    P. Ashtari, H. Surani-Yancheshmeh, S. Karimi, Morteza Saghafiyazdi
    JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, Vol. 149, pp.412-430, 2025
11. "Transforming zinc production waste into high-performance core-shell electrocatalysts for sustainable hydrogen production"
    Seyyed Hamed Mousavi, Morteza Saghafiyazdi, Davood Moradkhani, Mohammad Abedini mohammadi
    JOURNAL OF ELECTROANALYTICAL CHEMISTRY, Vol. 997, pp.1-15, 2025
12. "Synthesis of binder-free hybrid Ni-Co-Se@NiS2 nanostructures as highly active and durable electrocatalyst for hydrogen evolution reaction in alkaline media and Seawater"
    Sina Jamali, Mohammad Abedini mohammadi, Morteza Saghafiyazdi, Mohammad Talafi Noghani, , Mohammad Rezayat, Miguel Morales
    JOURNAL OF ELECTROANALYTICAL CHEMISTRY, Vol. 969, pp.118527-118540, 2024
13. "Tribology characteristics of novel Zn-Si alloys severely deformed by multi-directional forging"
    Faezeh Akbari, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
    Archives of Civil and Mechanical Engineering, Vol. 24, pp.1-10, 2024
14. "Improving tribological properties of CP-Ti by in-situ fabrication of Ti-WC surface composite using a pinless WC-Co stirring tool"
    Meisam Ashouri, Reza Tagiabadi, Mohammad Emami, Morteza Saghafiyazdi, Iman Ansarian
    Journal of Central South University, Vol. 31, pp.3688-3702, 2024
15. "Effect of solidification cooling rate on microstructure and tribology characteristics of Zn-4Si alloy"
    Faezeh Akbari, Mahya Ghol karam, SHADAN BEYRAMI, Ghazal Abolghasem shirazi, Khatereh Manteshloo, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
    International Journal of Minerals Metallurgy and Materials, Vol. 31, pp.362-373, 2024
16. "Effect of solidification cooling rate on corrosion behavior of Al-15Mg2Si composites"
    Elahe Safari, Reza Tagiabadi, Mohammad Hossein Ghoncheh, Mohammad Emami, Morteza Saghafiyazdi
    Materials Today Communications, Vol. 38, pp.1-10, 2024
17. "Statistical analysis of experimental factors for synthesis of copper oxide and tin oxide for antibacterial applications"
    Mohammad Rezayat, Mojtaba Karamimoghadam, Morteza Saghafiyazdi, Mahmoud Moradi, Mahdi Bodaghi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 127, pp.3017-3030, 2023
18. "Effect of Lateral Laser-Cladding Process on the Corrosion Performance of Inconel 625"
    Mohamad Rezayat, Amirhossein Aboutorabi sani, Mohammad Talafi Noghani, Morteza Saghafiyazdi, Morteza Taheri, , Mohammad Abedini mohammadi, Mahmoud Moradi, Antonio Manuel Mateo Garcia, Hossein Besharatloo
    Metals, Vol. 13, pp.1-16, 2023
19. "Facile hydrothermal synthesis of combined MoSe2PS nanostructures on nickel foam with superior electrocatalytic properties for hydrogen evolution reaction"
    Vahid Salarvand, Mohammad Abedini mohammadi, Ali Yousefi far, Morteza Saghafiyazdi, Amir Mostafaei
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol. 48, pp.10038-10050, 2023
20. "Effect of Cu addition on microstructure and corrosion behavior of Al-15Mg2Si composite"
    Leyla Hesami, Reza Tagiabadi, Mohammad Hossein Ghoncheh, Mohammad Emami, Morteza Saghafiyazdi
    Materials Testing, Vol. 65, pp.1-10, 2023
21. "Effect of Severe Surface Plastic Deformation on Tribological Properties of CoCrWNi Super Alloys"
    Rahim Nemati, Reza Tagiabadi, Morteza Saghafiyazdi, Saeid Amini
    Iranian Journal of Materials Forming, Vol. 10, pp.22-34, 2023
22. "Enhancing the tribological properties of pure Ti by pinless friction surface stirring"
    Meisam Ashouri, Mostafa Jafarzadgan, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 39, pp.3308-3320, 2023
23. "In-situ hydrothermal synthesis of NiCo(X)Se compound on nickel foam for efficient performance of water splitting reaction in alkaline media"
    Vahid Salarvand, Mohammad Abedinimohammad, Fateh Ahmadyan, Fereshteh Rajabi Kouchi, Morteza Saghafiyazdi, Amir Mostafaei
    JOURNAL OF ELECTROANALYTICAL CHEMISTRY, Vol. 926, pp.1-12, 2022
24. "Hydrothermally grown mixed ternary nickel ferrite oxides as hybrid battery-type electrodes"
    Seiedali Hosseini, Morteza Saghafiyazdi, Zeynodin Karami, , Mohammad Abedini mohammadi,
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, Vol. 33, pp.11725-11742, 2022
25. "ElectroCatalytic Activity of Nickel Foam with Co, Mo, and Ni Phosphide Nanostructures"
    Morteza Saghafiyazdi, Mohamad Rezayat, Joan Josep Roa Rovira
    PLASMA, Vol. 5, pp.221-232, 2022
26. "Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method"
    Seiedali Hosseini, Zeynodin Karami, , Morteza Saghafiyazdi, Mohammad Abedini mohammadi,
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 55, pp.161-171, 2022
27. "Synthesis and optimization of Mo-Ni-Se@NiSe core-shell nanostructures as efficient and durable electrocatalyst for hydrogen evolution reaction in alkaline media"
    Mohammad Abedini mohammadi, Morteza Saghafiyazdi, Mohammad Talafi Noghani, , Seiedali Hosseini
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol. 47, pp.34455-34470, 2022
28. "Sol-gel derived silicate-based bioactive glass: Studies of synergetic effect of zirconium and magnesium on structural and biological characteristics"
    , Mahzad Haji Mahdi Tajer, Mohammadamin Zohourfazeli, Zahra Miri, Morteza Saghafiyazdi
    JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 554, pp.1-10, 2021
29. "Synthesis and characterization of in vitro properties and biological behavior of Ag/Li co-doped 68S bioactive glass with and without phosphate"
    Mohsen Rahmani, , Morteza Saghafiyazdi
    JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 570, pp.1-9, 2021
30. "Production and characterization of high-performance cobalt-nickel selenide catalyst with excellent activity in HER"
    Fateh Ahmadyan, Vahid Salarvand, Morteza Saghafiyazdi, Mohammad Talafi Noghani, Ali Yousefi far
    Journal of Materials Research and Technology-JMR and T, Vol. 15, pp.3942-3950, 2021
31. "Mixed ternary metal MFeCo (M = Al, Mg, Cu, Zn, or Ni) oxide electrodes for high-performance energy storage devices"
    Morteza Saghafiyazdi, Seiedali Hosseini, Zeynodin Karami, , Mohammad Abedini mohammadi,
    IONICS, Vol. 27, pp.3777-3791, 2021
32. "A comparative study on the effect of pH values and carbonic additives on the supercapacitive performance of LDH-derived Ni-Co-Al oxide"
    Samaneh Vahedi, Morteza Saghafiyazdi, Ahmad Razaghian Arani, Marziyeh Azadfalah
    Journal of Energy Storage, Vol. 43, pp.103211-103224, 2021
33. "The Effect of Ag Substitution on Physicochemical and Biological Properties of Sol-Gel Derived 60%SiO2-31%CaO-4%P2O5-5%Li2O (mol%) Quaternary Bioactive Glass"
    Mohsen Rahmani, , Morteza Saghafiyazdi
    CERAMICS INTERNATIONAL, Vol. 47, pp.15985-15994, 2021
34. "Effect of freezing temperature and number of freeze-thaw cycles on mode I and mode II fracture toughness of sandstone"
    Koorosh Abdolghanizade, Mahdi Hosseini, Morteza Saghafiyazdi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 105, pp.1-7, 2020
35. "The Effect of Cyclic Solution Heat Treatment on the Martensitic Phase Transformation and Grain Refinement of Co-Cr-Mo Dental Alloy"
    shahab zangeneh, Hamid Reza Lashgari, shima Alsaadi, sara mohammad moradi, Morteza Saghafiyazdi
    Metals, Vol. 10, pp.1-17, 2020
36. "Comparison of Binary and Ternary Compositions of Ni-Co-Cu Oxides/VACNTs Electrodes for Energy Storage Devices with Excellent Capacitive Behaviour"
    Seiedali Hosseini, Morteza Saghafiyazdi, Abiri Hamed
    International Journal of Nanoscience and Nanotechnology (IJNN), Vol. 16, pp.91-102, 2020
37. "Synthesis, Characterization and Investigation of Hydrogen Evolution Activity of Ni-Mo/Al2O3 Composite"
    Vahid Salarvand, Hassan Mahmoodi, Fateh Ahmadyan, Nastaran Farahbakhsh, Ali Yousefi far, Morteza Saghafiyazdi, Mohammad Talafi Noghani
    ChemistrySelect, Vol. 5, pp.1-7, 2020
38. "Novel antibacterial Cu/Mg-substituted 58S-bioglass: Synthesis, characterization and investigation of in vitro bioactivity"
    , Alireza Ghorbanoghli, Masoud Kazem- Rostami, Arang Pazhouheshgar, Emad Salari, Morteza Saghafiyazdi, , Hossein Jahani, Fariborz Sharifian Jazi, Mohammadreza Tahriri
    International Journal of Applied Glass Science, Vol. 11, pp.685-698, 2020
39. "Ternary nanostructured MZnCo oxides (M=Al, Mg, Cu, Fe, Ni) prepared by hydrothermal method as excellent charge storage devices"
    Morteza Saghafiyazdi, Seiedali Hosseini, Shahab aldin Zangeneh, , Shams aldin Mohajerzadeh
    IONICS, Vol. 26, pp.1491-1505, 2020
40. "Zn-Co oxide electrodes with excellent capacitive behavior for using supercapacitor application"
    Morteza Saghafiyazdi, Shahab Aldin Zangeneh
    CURRENT APPLIED PHYSICS, Vol. 19, pp.745-755, 2019
41. "Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling"
    Vahid Salarvand, Morteza Saghafiyazdi, Mohammad Talafi Noghani
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 52, pp.164-174, 2019
42. "Effects of Temperature and Confining Pressure on the Mode I and Mode II Fracture Toughness of Cement Mortar"
    Navid Ghanbari Boosjin, Mahdi Hosseini, Morteza Saghafiyazdi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 104, pp.1-8, 2019
43. "Effects of number of freeze-thaw cycles and freezing temperature on mode I and mode II fracture toughness of cement mortar"
    Koorosh Abdolghanizade, Mahdi Hosseini, Morteza Saghafiyazdi
    Journal of Mining and Environment, Vol. 10, pp.967-978, 2019
44. "Charge storage properties of mixed ternary transition metal ferrites MZnFe oxides (M =Al, Mg, Cu, Fe, Ni) prepared by hydrothermal method"
    Morteza Saghafiyazdi, Seiedali Hosseini, Shahab aldin Zangeneh, , Vahid Salarvand, Samaneh Vahedi, Shamsaldin Mohajerzadeh
    SN Applied Sciences, Vol. 1, pp.1-16, 2019
45. "Mechano-chemical activation of MoO3-CuO/C powder mixture to synthesis nano crystalline Mo-Cu alloy"
    Morteza Saghafiyazdi, Mohammad Talafi Noghani, ALIREZA NAJJARi
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 51, pp.153-162, 2018
46. "Effects of different anionic dopants on the charge storage properties of binder less polypyrrole/vertically aligned carbon nanotube composites"
    Morteza Saghafiyazdi, masumeh mahmoodian, Seiedali Hosseini, Ali Abdollahi, Shams aldin Mohajerzadeh
    ELECTROCHIMICA ACTA, Vol. 283, pp.1450-1459, 2018
47. "Graphene oxide nanoribbons and their applications in supercapacitors"
    fathi mohammad, Morteza Saghafiyazdi, mahboubi farzad
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 47, pp.71-76, 2014
48. "Effect of Solidification Rate on Mechanical and Corrosion Behavior of Zn-xAl Biodegradable Alloys"
    Zeinab Ahmadi, Reza Tagiabadi, Morteza Saghafiyazdi
    Vol. 37, pp.59-82, 2026
49. ""
    Hassan Dargi, Reza Tagiabadi, Morteza Saghafiyazdi, Morteza Taheri, Vaira Vignesh Ramalingam
    Vol. -, pp.1-10, 2025
50. "Study of the Biological Properties of 68S Bioactive Glass Stabilized at Temperatures of 600-800 C to Improve its Biocompatibility in Bone Tissue Engineering Therapeutic Applications"
    Raheil Ashrafzadeh shimi, , Morteza Saghafiyazdi, Nilufar Kulivand
    Vol. 43, pp.67-80, 2024
51. "An Overview of the Structure, Optical Properties, Synthesis Methods and Applications of Graphene Quantum Dots"
    Sahand Kavand, Arman Sedghi, Saeid Baghshahi, Morteza Saghafiyazdi
    Vol. 13, pp.75-91, 2023
52. "Investigation of Electrochemical Properties of Cobalt Phospho Selenide Nanostructured Electrode in Hydrogen Evolution Reaction"
    Nafisehsadat Miran, Morteza Saghafiyazdi, Mohammad Talafi Noghani,
    Vol. 11, pp.46-59, 2023
53. ""
    Faezeh Akbari, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
    Vol. 6, pp.157-167, 2022
54. "Investigation of Effect of Mechanical Vibration During Solidification on Microstructure and Wear Properties of Zn-4Si Composite"
    Faezeh Akbari, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
    Vol. 6, pp.1-10, 2022
55. "Acoustic damping performance of aluminum nanocomposite foams with different additive of carbon nanotubes and comparison that with conventional rockwool"
    Abbas Bahreini, Mohammad Talafi Noghani, Morteza Saghafiyazdi, akbar ghasemi
    Vol. 10, pp.81-88, 2022
56. ""
    Javad Ansari, , Morteza Saghafiyazdi
    Vol. 16, pp.13-26, 2022
57. "Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its electrochemical performance as supercapacitor"
    Samaneh Vahedi, Morteza Saghafiyazdi, Ahmad Razaghian Arani
    Vol. 11, pp.63-80, 2021
58. "Investigation of the Effect of Strontium Ion Content on Thermal, Bioactivity, Antibacterial Properties and Behavior of MC3T3-E1 Osteoblast Cells in Silicate-Based Bioactive Glass"
    Nooshin Nankali, , Morteza Saghafiyazdi
    Vol. 15, pp.81-95, 2021
59. "Experimental comparison of sound transmission loss in pure aluminum and aluminum composite foams with 3wt% carbon nanotube and graphene nanoplate"
    Abbas Bahreini, Mohammad Talafi Noghani, Morteza Saghafiyazdi
    Vol. 9, pp.91-99, 2021
60. "Effect of confining pressure on Mode I and Mode II Fracture Toughness of Lushan sandstone"
    Navid Ghanbari Boosjin, Mahdi Hosseini, Morteza Saghafiyazdi
    Amirkabir Journal of Civil Engineering, Vol. 52, pp.2145-2154, 2020
61. "Investigation of the effect of electrolyte on acoustical behaviour of ceramic coatings produced by method Plasma Electrolytic Oxidation (PEO) on titanium"
    Abbas Bahreini, ali eyvaz zadeh, Mohammad Talafi Noghani, Morteza Saghafiyazdi
    Vol. 8, pp.7-13, 2020
62. ""
    Navid Ghanbari Boosjin, Mahdi Hosseini, Morteza Saghafiyazdi
    Vol. 12, pp.37-46, 2019
63. ""
    Koorosh Abdolghanizade, Mahdi Hosseini, Morteza Saghafiyazdi
    Vol. 11, pp.25-39, 2019
64. "Effect of processing parameters on the mechano-chemical synthesis of nano crystalline Mo-Cu/Al2O3 composite"
    SHIVA MORADI, Mohammad Talafi Noghani, Morteza Saghafiyazdi
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 51, pp.13-19, 2018
65. "Investigation of Bacteriation Properties of Copper-Tin Nanocrystalline Alloys Produced by Mechanical Alloys"
    Mohamad Rezayat, Mohammad Talafi Noghani, Morteza Saghafiyazdi, Reza Ahmadi
    Vol. 7, pp.29-41, 2018

Conference Paper

1. "The surface hardening of Haynes 25 super alloy using sever surface plastic deformation method"
   Rahim Nemati, Reza Tagiabadi, Morteza Saghafiyazdi, Saeed Amini
   10th international conference on mechanical engineering, materials and metallurgy, 2023
2. "Preparation and electrochemical characterization of Ni-Co oxides/CNT composites for supercapacitor application"
   Morteza Saghafiyazdi
   6thinternational biennia conference on ultra fine grainedand nano structured materials, pp.1-5, 2017
3. ""
   Zeynab Dadashi shanbaraki, Azadi Mahbubeh, Morteza Saghafiyazdi
   , pp.1-11, 2025
4. ""
   Leyla Hesami, Reza Tagiabadi, Morteza Saghafiyazdi
   The 7th annual national congress on the development of modern science and technologies in IRAN, 2025
5. ""
   Elahe Safari, Reza Tagiabadi, Morteza Saghafiyazdi
   The 7th annual national congress on the development of modern science and technologies in IRAN, 2025
6. ""
   Rahim Nemati, Reza Tagiabadi, Morteza Saghafiyazdi, Saeid Amini
   , 2025
7. ""
   Meisam Ashouri, Morteza Saghafiyazdi, Reza Tagiabadi, Iman Ansarian
   , 2025
8. ""
   Faezeh Akbari, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
   , 2025
9. ""
   Raheil Ashrafzadeh shimi, Morteza Saghafiyazdi
   The 12th international conference on materials science & metallurgical engineering, pp.1-4, 2023
10. ""
    Samira Hashemi, Morteza Saghafiyazdi, Reza Ahmadi
    The 12th international conference on materials science & metallurgical engineering, pp.1-4, 2023
11. ""
    Abbas Bahreini, Mohammad Talafi Noghani, Morteza Saghafiyazdi, Akbar Ghasemi yeklangi
    , pp.1-8, 2023
12. ""
    Abbas Bahreini, Mohammad Talafi Noghani, Morteza Saghafiyazdi, Akbar Ghasemi yeklangi
    , 2023
13. ""
    Abbas Bahreini, Mohammad Talafi Noghani, Morteza Saghafiyazdi, Akbar Ghasemi yaklangi
    , pp.1-5, 2023
14. ""
    Nilufar Kulivand, Reza Ahmadi, Morteza Saghafiyazdi
    11th International Conference on Materials & Metallurgical Engineering (iMat2022), pp.1-15, 2022
15. ""
    Nooshin Nankali, Morteza Saghafiyazdi
    11th International Conference on Materials & Metallurgical Engineering (iMat2022), 2022
16. ""
    Vahid Keshavarz, Morteza Saghafiyazdi
    11th International Conference on Materials & Metallurgical Engineering (iMat2022), pp.1-9, 2022
17. "Characterization of the sol-gel drived magnesium oxide doped 77S bioactive glass"
    Nilufar Kulivand, Reza Ahmadi, Morteza Saghafiyazdi
    , 2022
18. ""
    Vahid Keshavarz, Morteza Saghafiyazdi
    Third National Conference on Micro/Nanotechnology-ISC- 01220-93971, 2022
19. ""
    Abbas Bahreini, Mohammad Talafi Noghani, Morteza Saghafiyazdi, akbar ghasemi yekelangi
    , pp.1-8, 2022
20. ""
    Abbas Bahreini, Mohammad Talafi Noghani, Morteza Saghafiyazdi
    , 2021
21. ""
    Abbas Bahreini, Mohammad Talafi Noghani, Morteza Saghafiyazdi
    , 2021
22. ""
    Nooshin Nankali, Morteza Saghafiyazdi
    , 2021
23. ""
    Bijan Bostani, Morteza Saghafiyazdi, Reza Ahmadi, Behruz Bostani
    , 2021
24. ""
    Mohsen Rahmani, Morteza Saghafiyazdi
    , 2020
25. ""
    Amir Agha jafari, Mohammad Talafi Noghani, Morteza Saghafiyazdi, bostani behruz
    , 2019
26. ""
    Fateh Ahmadyan, vahid salarvand, Morteza Saghafiyazdi, Mohammad Talafi Noghani
    , pp.1-12, 2019
27. ""
    Samaneh Vahedi, Morteza Saghafiyazdi, Ahmad Razaghian Arani
    , 2019
28. ""
    Vahid Salarvand, Mohammad Talafi Noghani, Morteza Saghafiyazdi
    , 2017