Reza Tagiabadi (Faculty Member)

Journal Paper

1. "Effect of multi-pass multidirectional forging on microstructure and corrosion behavior of Zn-1Fe biodegradable alloy"
   Saba Hashemi Zarandi, Amirhosein Riazat, Mohammad Emami, Reza Tagiabadi
   JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 103, pp.1-15, 2025
2. "Multi-pass friction hardening treatment of Ti6Al4V alloy toward improved tribological properties"
   Atiie Shafaghatiyan, Reza Tagiabadi, Reza Ahmadi, Fatemeh Shahriyari, Mohammad Emami
   Materials Testing, Vol. 66, pp.397-409, 2025
3. "Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy"
   Rahim Nemati, Reza Tagiabadi, Morteza Saghafiyazdi, Saied Amini
   Journal of Ultrafine Grained and Nanostructured Materials, Vol. 58, pp.67-77, 2025
4. "Ultrasonic impact treatment of CoCrWNi superalloys for surface properties improvement"
   Rahim Nemati, Reza Tagiabadi, Morteza Saghafiyazdi, Saeid Amini
   Materials Testing, Vol. 67, pp.372-385, 2025
5. "Tribology characteristics of ultrasonic impact treated Co-based L-605 superalloy"
   Rahim Nemati, Reza Tagiabadi, Morteza Saghafiyazdi, Saeid Amin
   Iranian Journal of Materials Forming, Vol. 12, pp.37-50, 2025
6. "Improving tribological properties of CP-Ti by in-situ fabrication of Ti-WC surface composite using a pinless WC-Co stirring tool"
   Meisam Ashouri, Reza Tagiabadi, Mohammad Emami, Morteza Saghafiyazdi, Iman Ansarian
   Journal of Central South University, Vol. 31, pp.3688-3702, 2024
7. "Effect of Si Addition on the Weibull Distribution of Tensile Properties of Fe-bearing Al-Cu Alloys"
   SHAKIBA KHALESI, Reyhaneh Omidi, Reza Tagiabadi, M. Emami
   Silicon, Vol. 16, pp.4609-4620, 2024
8. "Assessment of Ce-rich intermetallics formation in Al-Cu-Mg-xCe alloys using thermal analysis cooling curves"
   Hossein Mohammadi, Reza Tagiabadi, M. Malekan
   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, Vol. 149, pp.7973-7985, 2024
9. "Improvement of Surface Mechanical and Tribological Characteristics of L-PBF Processed Commercially Pure Titanium through Ultrasonic Impact Treatment"
   Iman Ansarian, Reza Tagiabadi, Saeid Amini, Mohammad Hossein Mosallanejad, Luca Iuliano, Abdollah Saboori
   Acta Metallurgica Sinica-English Letters, Vol. 37, pp.1034-1046, 2024
10. "Effect of solidification cooling rate on microstructure and tribology characteristics of Zn-4Si alloy"
    Faezeh Akbari, Mahya Ghol karam, SHADAN BEYRAMI, Ghazal Abolghasem shirazi, Khatereh Manteshloo, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
    International Journal of Minerals Metallurgy and Materials, Vol. 31, pp.362-373, 2024
11. "Effect of solidification cooling rate on corrosion behavior of Al-15Mg2Si composites"
    Elahe Safari, Reza Tagiabadi, Mohammad Hossein Ghoncheh, Mohammad Emami, Morteza Saghafiyazdi
    Materials Today Communications, Vol. 38, pp.1-10, 2024
12. "Enhancing the corrosion behavior of Laser Powder Bed Fusion processed CP-Ti via Ultrasonic Peening"
    Iman Ansarian, Reza Tagiabadi, Saeid Amini, Abdollah Saboori
    MATERIALS LETTERS, Vol. 354, pp.1-4, 2024
13. "Tribology characteristics of novel Zn-Si alloys severely deformed by multi-directional forging"
    Faezeh Akbari, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
    Archives of Civil and Mechanical Engineering, Vol. 24, pp.1-10, 2024
14. "Effect of Severe Surface Plastic Deformation on Tribological Properties of CoCrWNi Super Alloys"
    Rahim Nemati, Reza Tagiabadi, Morteza Saghafiyazdi, Saeid Amini
    Iranian Journal of Materials Forming, Vol. 10, pp.22-34, 2023
15. "Effect of Cu addition on microstructure and corrosion behavior of Al-15Mg2Si composite"
    Leyla Hesami, Reza Tagiabadi, Mohammad Hossein Ghoncheh, Mohammad Emami, Morteza Saghafiyazdi
    Materials Testing, Vol. 65, pp.1-10, 2023
16. "Enhancing the tribological properties of pure Ti by pinless friction surface stirring"
    Meisam Ashouri, Mostafa Jafarzadgan, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 39, pp.3308-3320, 2023
17. "Study on the modification effect of copper on Al-15Mg(2)Si composite"
    Leyla Hesami, Reza Tagiabadi, M.H. Ghoncheh
    MATERIALS CHEMISTRY AND PHYSICS, Vol. 276, pp.1-10, 2022
18. "Mechanical properties of Al-15Mg(2)Si composites prepared under different solidification cooling rates"
    Elahe Safari, Reza Tagiabadi, M. H. Ghoncheh
    International Journal of Minerals Metallurgy and Materials, Vol. 29, pp.1249-1260, 2022
19. "Using double ellipsoid heat source model for prediction of HAZ grain growth in GTAW of stainless steel 304"
    Mostafa Jafarzadgan, Reza Tagiabadi, Mohammad Ammar Mofid
    Materials Today Communications, Vol. 31, pp.1-7, 2022
20. "Effect of Cooling Rate on Microstructure and Mechanical Properties of AA5056 Al-Mg Alloy"
    Mehdi Aslezare, Reza Tagiabadi, M. H. Ghoncheh
    International Journal of Metalcasting, Vol. 16, pp.1533-1543, 2022
21. "Enhancing the Mechanical Properties of Si Particle Reinforced ZA22 Composite by Ti-B Modification"
    Davood Youefi, Reza Tagiabadi, Mohammadhossin Shaeri, پویا عابدین زاده
    International Journal of Metalcasting, Vol. 15, pp.206-215, 2021
22. "Effect of equal channel angular pressing on microstructure and mechanical properties of thermally-homogenized Al-Mg2Si composites"
    Mahdi Chegini, Mohammadhossin Shaeri, Reza Tagiabadi, S. Cheginy
    MATERIALS CHEMISTRY AND PHYSICS, Vol. 259, pp.1-9, 2021
23. "Optimizing the mechanical properties of Al-4.5Cu-xSi alloys through multi-pass friction stir processing and post-process aging"
    Mohammad Mostafavi, Reza Tagiabadi, Mostafa Jafarzadgan
    Archives of Civil and Mechanical Engineering, Vol. 22, pp.1-15, 2021
24. "Tensile properties and hot tearing susceptibility of cast Al-Cu alloys containing excess Fe and Si"
    Khalil Ganjefard, Reza Tagiabadi, Mohammad Talafi Noghani, Mohammad Hossein Ghoncheh
    International Journal of Minerals Metallurgy and Materials, Vol. 28, pp.718-728, 2021
25. "Tribological properties improvement of conventionally-cast Al-8.5Fe-1.3V-1.7Si alloy by multi-pass friction stir processing"
    ZIBA NOURI HARZEVILI, Reza Tagiabadi
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 31, pp.1262-1275, 2021
26. "Tribological Properties of Surface Friction Hardened AISI 316L Steel"
    Alireza Khaksaran, Reza Tagiabadi, Mostafa Jafarzadgan
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. 75, pp.1979-1989, 2021
27. "Effect of multi-pass multi-directional forging on tribological properties of Si-rich eutectoid ZA alloys"
    Davood Youefi, Reza Tagiabadi, Mohammadhossin Shaeri
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 31, pp.2024-2038, 2021
28. "Mechanical properties enhancement of Mg-4Si in-situ composites by friction stir processing"
    Reza Tagiabadi, Ali Moharrami
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 37, pp.66-77, 2021
29. "Quality Index Assessment of Multi-Pass Friction Stir Processed Al-Si-Mg Alloys Fully Produced by Recycling of Machining Chips"
    Reza Tagiabadi, Hamed Jalali
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. 74, pp.273-284, 2021
30. "Tribological behavior of friction stir processed SiP/ZA40 in-situ composites"
    Fateme Rajabi dehaki, Reza Tagiabadi, Mohammadhossin Shaeri
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 30, pp.3043-3057, 2020
31. "Mechanical properties enhancement of cast Al-8.5Fe-1.3V-1.7Si (FVS0812) alloy by friction stir processing"
    ZIBA NOURI HARZEVILI, Reza Tagiabadi, M. Moazami-Goudarzi
    Archives of Civil and Mechanical Engineering, Vol. 20, pp.1-10, 2020
32. "Investigating the combination effect of warm extrusion and multi-directional forging on microstructure and mechanical properties of Al-Mg2Si composites"
    Mehdi Sharifzadeh, Mohammadhossin Shaeri, Reza Tagiabadi, F. Mozaffari, M. Ebrahimi
    Archives of Civil and Mechanical Engineering, Vol. 20, pp.1-10, 2020
33. "Enhancing the mechanical and tribological properties of Mg2Si-rich aluminum alloys by multi-pass friction stir processing"
    Ali Moharrami, Ahmad Razaghian Arani, Moslem Paidar, Michaela Slapakova, Olatunji Oladimeji Ojo, Reza Tagiabadi
    MATERIALS CHEMISTRY AND PHYSICS, Vol. 250, pp.1-15, 2020
34. "Effect of cell imprinting on viability and drug susceptibility of breast cancer cells to doxorubicin"
    Fatemeh Shahriari, Mohsen Janmaleki, Shahriar Sharifi, Milad Eyvazi Hesar, Sasha Hoshian, Reza Tagiabadi, Ahmad Razaghian Arani, Majid Ghadiri, Afshin Peirovi, Morteza Mahmoudi, Amir Sanati Nezhad, Ali Khademhosseini
    Acta Biomaterialia, Vol. 113, pp.119-129, 2020
35. "Heat Input Effect on Microstructure and Mechanical Properties in Shielded Metal Arc Welding of Dissimilar AISI 316L/St-37 Steel"
    Majid Ahangaryan, Mostafa Jafarzadgan, Reza Tagiabadi
    International Journal of Iron and Steel Society of Iran, Vol. 17, pp.1-10, 2020
36. "Tribology of Si-rich TIG-deposited coatings on Zn-40Al-2Cu alloy"
    Fateme Rajabi dehaki, Reza Tagiabadi, Mohammadhossin Shaeri
    SURFACE ENGINEERING, Vol. 36, pp.735-744, 2020
37. "Microstructural evolution and mechanical properties of multi-directionally forged Si-P/ZA22 composite"
    Davood Youefi, Reza Tagiabadi, Mohammadhossin Shaeri, Iman Ansarian
    Archives of Civil and Mechanical Engineering, Vol. 20, pp.1-10, 2020
38. "Increasing the recycling percent in liquid-state recycling of Al machining chips by friction stir processing"
    Reza Tagiabadi, ALI MOHAMMADALI ROSTAMABADI, Shahab Tasvibi tanha, Mohammadhossin Shaeri
    MATERIALS CHEMISTRY AND PHYSICS, Vol. 243, pp.1-8, 2020
39. "Investigation of Ca in the Microstructural Evolution and Porosity Analysis of ZK60 alloy in as-cast and extruded conditions"
    Samiraa Moradnezhad, Ahmad Razaghian Arani, M. Emamy, Reza Tagiabadi
    Iranian Journal of Materials Forming, Vol. 6, pp.24-31, 2019
40. "Effect of multi-pass friction stir processing on microstructure and mechanical properties of cast Al-7Fe-5Ni alloy"
    Mojtaba Fekriesoostani, Reza Tagiabadi, Mostafa Jafarzadgan, Maryam Vasheghani Farahani
    Materials Research Express, Vol. 6, pp.1-25, 2019
41. "Improving mechanical properties of Mn-added hypoeutectic Al-4Ni alloy by friction stir processing"
    Fateme Yousefi, Reza Tagiabadi, Saeid Baghshahi
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 29, pp.460-472, 2019
42. "Synthesis of Aluminum- CNTs Composites Using Double-Pressing Double-Sintering Method (DPDS)"
    Akbar Yarahmadi, Masoud Rajabi, Mohammad Talafi Noghani, Reza Tagiabadi
    Journal of Nanostructures, Vol. 9, pp.94-102, 2019
43. "Improving the Tribological Properties of Al-7Fe-5Ni Alloys via Friction Stir Processing"
    Mojtaba Fekriesoostani, Reza Tagiabadi, Mostafa Jafarzadgan, Fatemeh Shahriari, Aida Rahmani
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol. 141, 2019
44. "The Correlation of Microstructure and Mechanical Properties of In-Situ Al-Mg2Si Cast Composite Processed by Equal Channel Angular Pressing"
    Mahdi Chegini, Mohammadhossin Shaeri, Reza Tagiabadi, sajjad chegini, djavanroodi faramarz
    Materials, Vol. 12, pp.1-12, 2019
45. "Statistical Strength Analysis of Dissimilar AA2024-T6 and AA6061-T6 Friction Stir Welded Joints"
    Reza Tagiabadi, نیلوفر آریا
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 28, pp.1822-1832, 2019
46. "Effect of Ca additions on evolved microstructures and subsequent mechanical properties of a cast and hot-extruded Mg-Zn-Zr magnesium alloy"
    Samiraa Moradnezhad, Ahmad Razaghian Arani, Reza Tagiabadi, H. R. Abedi, A. Salandari-Rabori, M. Emamy
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 104, pp.4265-4275, 2019
47. "Effect of Oxide Bifilms on the Fracture Behavior of AM60B Mg Alloy"
    Reza Tagiabadi, Amir hossein Shevidi, Ahmad Razaghian Arani, پویا عابدین زاده
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. 73, pp.275-283, 2019
48. "Effect of Tool Pin Profile on the Microstructure and Tribological Properties of Friction Stir Processed Al-20 wt% Mg2Si Composite"
    Ali Moharrami, Ahmad Razaghian Arani, M. Emamy, Reza Tagiabadi
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol. 141, pp.1-10, 2019
49. "Effect of friction hardening on the surface mechanical properties and tribological behavior of biocompatible Ti-6Al-4V alloy"
    Fatemeh Shahriari, Reza Tagiabadi, Ahmad Razaghian Arani, Morteza Mahmoudi
    Journal of Manufacturing Processes, Vol. 31, pp.776-786, 2018
50. "Microstructure, Texture, Electrical and Mechanical Properties of AA-6063 Processed by Multi Directional Forging"
    Alireza Dashti, Mohammadhossin Shaeri, Reza Tagiabadi, faramarz djavanroodi, farzaneh vali ghazvini, hamid javadi
    Materials, Vol. 11, pp.1-17, 2018
51. "Investigation of the Tribological Properties of AlxSi-1.2Fe(Mn) (x=5-13 wt.%) Alloys"
    سامان پولادوند, Reza Tagiabadi, Fatemeh Shahriari
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 27, pp.3323-3334, 2018
52. "Effect of Fe-impurity on tribological properties of Al-15Mg(2)Si composite"
    آیدا ندیم, Reza Tagiabadi, Ahmad Razaghian Arani, Mohammad Talafi Noghani, mohammadhosein ghoncheh
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 28, pp.1084-1093, 2018
53. "Quality index and hot tearing susceptibility of Al-7Si-0.35Mg-xCu alloys"
    Reza Tagiabadi, Alireza Fayegh, Arefeh Pakbin, M. NAZARI, M.H. GHONCHEH
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 28, pp.1275-1286, 2018
54. "Effect of partial substitution of Mn for Ni on mechanical properties of friction stir processed hypoeutectic Al-Ni alloys"
    Fateme Yousefi, Reza Tagiabadi, Saeid Baghshahi
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, Vol. 49, pp.3007-3018, 2018
55. "Weibull analysis of effect of T6 heat treatment on fracture strength of AM60B magnesium alloy"
    Amir hossein Shevidi, Reza Tagiabadi, Ahmad Razaghian Arani
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 28, pp.20-29, 2018
56. "Effect of friction hardening pre-treatment on increasing cytocompatibility of alkali heat-treated Ti-6Al-4V alloy"
    Fatemeh Shahriari, Ahmad Razaghian Arani, Reza Tagiabadi, Afshin Peirovi, A. Amini
    SURFACE and COATINGS TECHNOLOGY, Vol. 353, pp.148-157, 2018
57. "Effect of Mn Modification on the Tribological Properties of In Situ Al-15Mg(2)Si Composites Containing Fe as an Impurity"
    آیدا ندیم, Reza Tagiabadi, Ahmad Razaghian Arani
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol. 140, 2018
58. "Effect of Be Modification on the Oxide Bifilms and Tensile Strength Reliability of Al-Si-Mg Alloys Containing Excess Fe"
    مجتبی اسدیان نوذری, Reza Tagiabadi, M. Karimzadeh, M. H. Ghoncheh
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, Vol. 49, pp.1236-1245, 2018
59. "Effect of Bifilm Oxides on the Dry Sliding Wear Behavior of Fe-Rich Al-Si Alloys"
    Nooshin Akaberi, Reza Tagiabadi, Ahmad Razaghian Arani
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol. 139, pp.1-10, 2017
60. "Investigation on beneficial effects of beryllium on entrained oxide films mechanical properties and casting reliability of Fe-rich Al Si cast alloy"
    مجتبی اسدیان نوذری, Reza Tagiabadi, mahdi karimzadeh, mahammad hesein ghoncheh
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 31, pp.506-512, 2015
61. "Dry sliding wear behaviour of hypoeutectic Al Si alloys containing excess iron"
    Reza Tagiabadi, hamid reza ghasemi
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 25, pp.1017-1022, 2009
62. "Effect of iron-rich intermetallics on the sliding wear behavior of Al Si alloys"
    Reza Tagiabadi, hamid reza ghasemi, saeed shabestari
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 490, pp.162-170, 2008
63. "بررسی تجربی رشد دانه، سختی و استحکام در مس خالص تجاری"
    Mostafa Jafarzadgan, Reza Tagiabadi, Mohammad Amar mofid, Ayoob Saeedinezhad
    مهندسی متالورژی, 2024
64. "The Effect of Surface Severe Plastic Deformation on Microstructure and Mechanical Properties of Pure Titanium Produced by Selective Laser Melting"
    Iman Ansarian, Reza Tagiabadi, Saeed Amini, Abdollah Sabouri
    پژوهشنامه ریخته گری, Vol. 7, pp.15-24, 2023
65. "An Investigation on the Effect of Grain Refinement on the Fluidity and Hot Tearing Susceptibility of Ce-Modified 2024 Al Alloy"
    Hossein Mohammadi, Reza Tagiabadi, Mehdi Malekan
    پژوهشنامه ریخته گری, Vol. 6, pp.195-202, 2023
66. "بررسی تاثیر ارتعاش قالب هنگام انجماد بر ساختار و مقاومت به خوردگی آلیاژ ریختگی Zn-4Si"
    Faezeh Akbari, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
    پژوهشنامه ریخته گری, Vol. 6, pp.157-167, 2022
67. "Investigation of Effect of Mechanical Vibration During Solidification on Microstructure and Wear Properties of Zn-4Si Composite"
    Faezeh Akbari, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
    پژوهشنامه ریخته گری, Vol. 6, pp.1-10, 2022
68. "بررسی ریزساختار و خواص مکانیکی آلیاژهای Al-2Ni-xMn به عنوان جایگزین آلیاژ هیپویوتکتیک Al-4Ni"
    Fateme Yousefi, Reza Tagiabadi, Saeid Baghshahi
    پژوهشنامه ریخته گری, Vol. 5, pp.51-62, 2021
69. "بررسی تاثیر سیلیسیم بر قابلیت ریخته گری آلیاژهای Al-Cu-Si"
    Mohammad Mostafavi, Mostafa Jafarzadgan, Reza Tagiabadi
    پژوهشنامه ریخته گری, Vol. 4, pp.215-226, 2021
70. "Effect of Ti and multidirectional forging on shear mechanical properties of in-situ ZA22-4Si composite"
    Davood Youefi, Reza Tagiabadi, Mohammadhossin Shaeri
    مهندسی متالورژی, Vol. 24, pp.122-132, 2021
71. "Effect of severe plastic deformation by multidirectional forging on mechanical properties of Ti modified SiP/ZA22 composite"
    Davood Youefi, Reza Tagiabadi, Mohammadhossin Shaeri
    مهندسی مکانیک مدرس, Vol. 21, pp.707-718, 2021
72. "بررسی تاثیر مس در بهسازی ساختاری و اندیس کیفیت کامپوزیت Al-15Mg2Si"
    Leyla Hesami, Reza Tagiabadi
    پژوهشنامه ریخته گری, Vol. 3, pp.217-227, 2020
73. "Effect of Si and Fe on thermal modification behavior of Al-4.5Cu-xSi-yFe"
    Khalil Ganjefard, Reza Tagiabadi, Mohammad Talafi Noghani
    مهندسی متالورژی, Vol. 23, pp.255-269, 2020
74. "Simulation of heat transfer in gas tungsten arc welding of stainless steel type 304"
    Mostafa Jafarzadgan, Reza Tagiabadi, Mohammad Ammar Mofid
    مهندسی متالورژی, Vol. 23, pp.74-83, 2020
75. "بررسی تاثیر بهسازی تبریدی بر ریزساختار و اندیس کیفیت کامپوزیت Al-15Mg2Si"
    Elahe Safari, Reza Tagiabadi
    پژوهشنامه ریخته گری, Vol. 4, pp.79-87, 2020
76. "Improving the Mechanical Properties of Mn-rich Al-4Ni-4Mn Alloy by Increasing the Solidification Rate and Friction Stir Processing"
    Fateme Yousefi, Reza Tagiabadi, Saeid Baghshahi
    مهندسی مکانیک مدرس, Vol. 19, pp.2176-2182, 2019
77. "بررسی اثر تغییر شکل پلاستیک شدید بر ریزساختار، خواص مکانیکی و هدایت الکتریکی آلیاژ آلومینیوم 7075"
    Alireza Dashti, Mohammadhossin Shaeri, Reza Tagiabadi
    مواد نوین, Vol. 8, pp.73-86, 2018
78. "Effect of Modifier Elements on Quality Index Improvement of A356 Aluminum Alloy Before and After T6 Heat Treatment"
    مرتضی محمدی, Reza Tagiabadi, Maryam Nazari
    ریخته گری, Vol. 2, pp.11-25, 2018
79. "Improving the mechanical properties of Al-Ni-Fe alloys through friction stir processing"
    Mojtaba Fekriesoostani, Reza Tagiabadi, Mostafa Jafarzadgan
    مهندسی متالورژی, Vol. 20, pp.121-131, 2017
80. "تاثیر عملیات حرارتی و مس بر خواص کششی و اندیس کیفیت آلیاژهای Al-7Si-0.35Mg-xFe"
    Reza Tagiabadi, Mohammad Talafi Noghani, Yalda Karimi abadi, Mahsa Iranshahi, Maryam Nazari
    فرآیندهای نوین در مهندسی مواد, Vol. 11, pp.65-75, 2017
81. "بررسی تاثیر منگنز بر قابلیت ریخته گری آلیاژهای هیپویوتکتیک آلومینیم-2 نیکل-ایکس منگنز"
    Fateme Yousefi, Reza Tagiabadi, Saeid Baghshahi
    ریخته گری, Vol. 1, pp.69-78, 2017
82. "بررسی افزودن درصدهای گوناگون کلسیم بر خواص ریزساختاری و مکانیکی آلیاژ ریختگی منیزیم-روی-زیرکونیوم"
    Samiraa Moradnezhad, Ahmad Razaghian Arani, M Emammy, Reza Tagiabadi
    ریخته گری, Vol. 1, pp.2-10, 2016
83. "Quantitative investigation of hot tearing sensitivity in Al-9Si-Fe(Mn) alloys"
    Reza Tagiabadi, مجتبی جراحی, مریم نظری
    مهندسی متالورژی, Vol. 19, pp.195-205, 2016
84. "بررسی خواص سایشی آلیاژهای Al-(5-13)Si-Fe"
    سامان پولادوند, Reza Tagiabadi, saeed ghodrat nama shabestari
    فصلنامه علوم و مهندسی سطح, pp.85-95, 2015
85. "بررسی تاثیر ترکیبات بین فلزی غنی از آهن بر استعداد به پارگی گرم آلیاژهای هیپویوتکتیک آلومینیم-سیلیسیم"
    Reza Tagiabadi, مجتبی جراحی, maryam nazari
    ریخته گری (انجمن علمی ریخته گری ایران), pp.13-22, 2015
86. "بررسی تاثیر آهن و منگنز بر خواص مکانیکی و سایشی آلیاژ آلومینیم-سیلیسیم 332"
    akbar eshaghi, Reza Tagiabadi, hamidreza ghasemi
    علوم و مهندسی سطح, pp.1-10, 2012

Conference Paper

1. "The surface hardening of Haynes 25 super alloy using sever surface plastic deformation method"
   Rahim Nemati, Reza Tagiabadi, Morteza Saghafiyazdi, Saeed Amini
   10th international conference on mechanical engineering, materials and metallurgy, 2023
2. "Effect of process parameters on the hardness and wear properties of friction stir processed Al-Fe-Ni alloy"
   Mojtaba Fekriesoostani, Reza Tagiabadi, Mostafa Jafarzadgan, Iman Ansarian
   5th International Conference On Mechanical Engineering, Materials and Metallurgy, No 1 , pp.1-10, 2021
3. "Effect of carbide distribution on the sliding wear behavior of DIN 55Cr3 steel"
   Masoud Ghorbanzadeh, Reza Tagiabadi, Iman Ansarian
   5th International Conference On Mechanical Engineering, Materials and Metallurgy, No 1 , pp.1-10, 2021
4. "surface properties of Ti6Al4V modified by simple thermo-chemical modifications"
   Fatemeh Shahriari, Reza Tagiabadi, Ahmad Razaghian Arani
   8th international conference on advances in engineering and technology (RTET-2018), 2018
5. "Investigation of Ca on the microstructural evolution"
   Samiraa Moradnezhad, Ahmad Razaghian Arani, M. Emamy, Reza Tagiabadi
   پنجمین کنفرانس بین المللی مهندسی مواد و متالورژی, No 5 , pp.1-10, 2016
6. "Influence of Temperature and Pressure on Mechanical properties of CNTs Reinforced Aluminum Nano-composites Fabbricated by Double-pressing Double-sintering Method"
   Akbar Yarahmadi, Masoud Rajabi, Mohammad Talafi Noghani, Reza Tagiabadi
   Iran International Aluminum Conference(IIAC2016), pp.1-6, 2016
7. "Al-CNTs Nano-composite Produced f Via Double-pressing Double-sintering Method"
   Akbar Yarahmadi, Masoud Rajabi, Mohammad Talafi Noghani, Reza Tagiabadi
   Iran International Aluminum Conference(IIAC2016), 2016
8. "تاثیر فرایند کوبش فراصوتی بر پارامترهای زبری سطح سوپرآلیاژ L-605"
   Rahim Nemati, Reza Tagiabadi, Morteza Saghafiyazdi, Saeid Amini
   بیست و یکمین همایش ملی و دهمین کنفرانس بین المللی مهندسی ساخت و تولید/کد اختصاصی:03241-89381, 2025
9. "تاثیر سرعت انجماد بر ریزساختار و مقاومت به خوردگی آلیاژ Zn-4Si"
   Faezeh Akbari, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
   بیست و یکمین همایش ملی و دهمین کنفرانس بین المللی مهندسی ساخت و تولید/کد اختصاصی:03241-89381, 2025
10. "تاثیر فرآوری اصطکاکی سطحی با ابزار بدون پین روی مقاومت به خوردگی تیتانیم خالص"
    Meisam Ashouri, Morteza Saghafiyazdi, Reza Tagiabadi, Iman Ansarian
    بیست و یکمین همایش ملی و دهمین کنفرانس بین المللی مهندسی ساخت و تولید/کد اختصاصی:03241-89381, 2025
11. "بهبود ریزساختار و خواص کششی کامپوزیت هیپویوتکتیک Al-10Mg2Si از طریق فرایند ECAP"
    Mahdi Chegini, Reza Tagiabadi, Mohammadhossin Shaeri, Iman Ansarian
    بیستمین همایش ملی و نهمین کنفرانس بین المللی انجمن مهندسی ساخت و تولید ایران// کد اختصاصی:02240-77875, No 1 , pp.1-10, 2024
12. "بهبود خواص مکانیکی کامپوزیت Al-20Mg2Si توسط تغییر شکل پلاستیک شدید"
    Mahdi Chegini, Reza Tagiabadi, Mohammadhossin Shaeri, Iman Ansarian
    بیستمین همایش ملی و نهمین کنفرانس بین المللی مهندسی ساخت و تولید, 2024
13. "تاثیر فرایند پرس در کانالهای زاو یه دار همسان بر خواص کششی کامپوزیت های ریختگی -Al 15Mg2Si"
    Mahdi Chegini, Reza Tagiabadi, Mohammadhossin Shaeri, Iman Ansarian
    هجدهمین همایش ملی و هفتمین کنفرانس بین المللی مهندسی ساخت و تولید ایران - کد اختصاصی:00211-38040, 2022
14. "تاثیر فرآوری اصطکاکی اغتشاشی بر مکانیزم شکست آلیاژ A356 تولید شده از طریق باز یافت براده"
    Hamed Jalali, Reza Tagiabadi, Iman Ansarian
    هجدهمین همایش ملی و هفتمین کنفرانس بین المللی مهندسی ساخت و تولید ایران - کد اختصاصی:00211-38040, 2022
15. "بهبود انعطاف پذیری آلیاژ ریختگی FVS0812 به روش فرآوری اصطکاکی اغتشاشی"
    ZIBA NOURI HARZEVILI, Reza Tagiabadi, Iman Ansarian
    پنجمین کنفرانس ملی مواد، متالورژی و معدن, pp.1-10, 2022
16. "بررسی تاثیر بهسازی تبریدی بر ریزساختار و خواص مکانیکی آلیاژهای هیپویوتکتیک Al-Ni(Mn)"
    Fateme Yousefi, Reza Tagiabadi, Saeid Baghshahi, Iman Ansarian
    هفدهمین همایش ملی و ششمین کنفرانس بین المللی ساخت و تولید ایران -کد اختصاصی:12210-27643, No 1 , pp.1-5, 2021
17. "Effects of Calcium Addition on mechanical properties of Mg-6 Zn-0.7 Zr Alloy in As-cast condition"
    Samiraa Moradnezhad, Ahmad Razaghian Arani, M. Emamy, Reza Tagiabadi
    پنجمین کنفرانس بین المللی مهندسی مواد و متالورژی و دهمین کنفرانس مشترک مهندسین متالورژی و انجمن علمی ریخته گری ایران, 2016
18. "An investigation on the effect of entrained oxide bifilms and solutionizing time on the hardness and tensile strength og hypoeutectic Al-Si-Mg alloys"
    Reza Tagiabadi, Maryam Nazari, Farzaneh Shamsi, Mona Keshtdar
    دومین کنفرانس بین المللی و سومین همایش ملی کاربرد فناوری های نوین در علوم مهندسی, 2016
19. "بهبود خواص تریبولوژیکی فولادهای زنگ نزن اوستنیتی با بهره گیری از فرایند تغییر شکل پلاستیک شدید بر پایه اصطکاک"
    Alireza Khaksaran, Reza Tagiabadi, Mohammad Talafi Noghani, Mostafa Jafarzadgan
    چهار مین کنفرانس بین المللی مهندسی مواد و متالورزی...., 2015
20. "Effect of grain refining and modification on mechanicla properties of Al - Si - Mg alloys with different Fe content"
    شبنم نجفی, Mohammad Talafi Noghani, Reza Tagiabadi
    3th international Engineering Materials Metallurgy Conference, 2014
21. "بررسی تاثیر فیلمهای اکسیدی دوگانه محبوس بر مکانیزم سایش لغزشی آلیاژهای آلومینیم-سیلیسیم در شرایط ریختگی و عملیات حرارتی"
    Nooshin Akaberi, Reza Tagiabadi, Ahmad Razaghian Arani
    دومین همایش بین المللی و هفتمین همایش مشترک انجمن مهندسی متالورژی ایران و انجمن علمی ریخته گری ایران, 2013
22. "بهسازی تاثیر منفی فیلمهای اکسیدی دوگانه محبوس بر خواص سایشی آلیاژهای هیپویوتکتیک آلومینیم-سیلیسیم با بهره گیری از ترکیبات بین فلزی غنی از آهن"
    Nooshin Akaberi, Reza Tagiabadi
    اولین همایش ملی فلزات و آلیاژهای غیرآهنی مواد و فناوریهای نوین کاربردی, 2013
23. "بررسی تاثیر عنصر بر روی هدایت الکتریکی هادیهای آلومینیومی"
    فاطمه اصفهانی, Mohammad Talafi Noghani, Reza Tagiabadi
    چهارمین همایش پژوهش های زبان و ادبیات فارسی, No 3 , pp.1-10, 2008